Surface Mount Technology | Hanwha Pick and Place Machine

 

Pick and place machine is one of the smt process important.  We are supplying Hanwha multi-function placement, Hanwha pick and place machine, Hanwha smt placement, Hanwha smt placement machine, Hanwha chip mounter, Hanwha chip mounter etc..

 

Surface-mount technology (SMT) is a method for producing electronic circuits in which the components are mounted or placed directly onto the surface of printed circuit boards ( PCBs ). An electronic device so made is called a surface-mount device (SMD). In industry, it has largely replaced the through-hole technology construction method of fitting components with wire leads into holes in the circuit board. Both technologies can be used on the same board, with the through-hole technology used for components not suitable for surface mounting such as large transformers and heat-sinked power semiconductors.

By employing SMT, the production process speeds up, but the risk of defects also increases due to component miniaturization and to the denser packing of boards. In those conditions, detection of failures has become critical for any SMT manufacturing process.

An SMT component is usually smaller than its through-hole counterpart because it has either smaller leads or no leads at all. It may have short pins or leads of various styles, flat contacts, a matrix of solder balls (BGAs), or terminations on the body of the component.

 

❙ Hanwha pick and place machine video