Hanwha SMT Pick and Place Machine 当前位置: Home >>News>>Samsung |
How to operate the safety interlock of Hanwha Chip Mounter correctly? |
This section describes the operation of safety interlocks manipulated to stop the machine immediately under an emergency situation or for maintenance purposes.
1) EMG (Emergency Stop) switch This is an emergency stop switch. Operation of this machine is immediately suspended if this switch is pressed in case of an emergency. Supply of all powers except for the power to a computer is ceased. The emergency stop status can be released by turning the ‘EMG’ switch in the direction of the arrow and pressing the RESET button. Warning When the emergency shutdown has been applied, the power supply to all of the machine’s servo motors is turned off. However, the power supply to other components and devices remains turned on. Exercise care when taking measures against an error for the section to which power is supplied. 2) Door Lock switch If the door is open while this machine is running, the door switch is activated and the system comes into the emergency stop status. The emergency stop status is released if the door is closed. In order to resume the operation, press ‘READ’ button on the operation panel to release the emergency status, then press ‘Start’ button. Warning If the safety sensor of the door is cancelled arbitrarily, the machine will not stop even though the door is opened during operation, which could cause injury. The safety sensor of the door must not be cancelled arbitrarily. 3) Safeguard override key switch This is used for the door interlock bypass. It should be used limitedly only when performing initial setting or maintenance of the machine. Danger The Safeguard override key switch must be used by the designated responsible personnel. It must be carefully used for machine operation.
The warranty is issued to cover the following machine faults and malfunctions.
If any part of the machine fails to function properly under normal conditions of usage due to defects in material or workmanship, it will be repaired by Hanwha Techwin Co., Ltd. at no charge for either parts or labor.
The term of this warranty shall expire for any of the following cases:
Any of the following cases are not covered by this warranty:
Keywords: SMT pick and place machine, JUKI RS-1R pick and place machine, JUKI RX-7R pick and place machine, JUKI Pick and place Machine, Samsung Pick and Place Machine, Hanwha SM481 Plus Pick and Place Machine, SMT482Plus, SMT 471Plus, SM321, SM421, SM451, SM485, SCM-1, SLM100, SLM120, EXCEN PRO M, DECAN F2, DECAN L2, DECAN S2, DECAN S1, HM520, Yamaha Pick and Place Machine, Panasonic Pick and Place Machine, FUJI Pick and Place Machine, Siemens Pick and Place Machine, Samsung SMT Mounter, Samsung Chip Mounter, Samsung Chip Shooter, Samsung Chip Placement.
I.C.T is a manufacturer of SMT machines. It mainly provides customers with SMT production lines including SMT Stencil Printers, Pick and place machines, Reflow Oven, AOI Machine, Wave Soldering Machine and PCB Handling Machine etc. I.C.T has more than 25 researches on SMT and DIP technology, for the world Customers provide SMT total solutions. There are successful cases of SMT technical team in Asia, Europe, America, Africa, and Australia. I.C.T provide SMT solutions at various stages according to the different needs of customers. I.C.T is not only a provider of SMT equipment and technology, but also is the customer's escort in the field of SMT and DIP. Welcome more people to discuss with us about SMT technologies and solutions, please contact us for more information: WhatsApp/ Skype / WeChat: +86-13670124230,Email: etasmt@foxmail.com |
文章From:http://www.smt33.com//te_news_bulletin/2021-07-22/30161.chtml |